Orbital-scale record of the late Cenomanian–Turonian oceanic anoxic event (OAE-2) in the Tarfaya Basin (Morocco)     

Wolfgang Kuhnt  Florian Luderer  Sandra Nederbragt  Jürgen Thurow  Thomas Wagner 《International Journal of Earth Sciences》2005,94(1):147-159

High sedimentation rates (up to 12 cm/kyear) of laminated organic carbon-rich biogenic limestones in the Tarfaya Basin provide an unusually high (millennial) resolution record of the late Cenomanian oceanic anoxic event (OAE-2). The global positive carbon-isotope excursion across the Cenomanian–Turonian corresponds to 11 light/dark sedimentary cycles. We interpret these cycles as a response to orbital obliquity variation and estimate the duration of the complete excursion as 440 kyear or one long eccentricity cycle. On this timescale, the main increase in ¹³C values occurred over a short time interval of less than 20 kyear in the late Cenomanian and reached a first maximum approximately 15 kyear prior to the bulk (mainly coccoliths) ¹⁸O-derived sea surface maximum temperature that occurs coeval to the extinction of Rotalipora cushmani. Organic carbon-accumulation rates follow obliquity cycles, reaching a maximum approximately 10 kyear after the last occurrence of R. cushmani, then slowly decreasing during the early Turonian. Thus, the maximum temperature and the maximum organic carbon accumulation in the Tarfaya Basin lagged by at least 15 kyear behind the global carbon-isotope shift and a proposed reduction of atmospheric CO₂ content. The climate change across the Cenomanian/Turonian boundary probably occurred independent of CO₂ levels and may have been controlled by different greenhouse gases (water vapour and methane) and changes in ocean circulation (i.e., opening of the Equatorial Atlantic gateway)  相似文献   

Large-strain deformation and strain partitioning in polyphase rocks: Dislocation creep of olivine–magnesiowüstite aggregates     

Misha Bystricky  Florian Heidelbach  Steve Mackwell   《Tectonophysics》2006,427(1-4):115

Aggregates composed of olivine and magnesiowüstite have been deformed to large strains at high pressure and temperature to investigate stress and strain partitioning, phase segregation and possible localization of deformation in a polyphase material. Samples with 20 vol.% of natural olivine and 80 vol.% of (Mg_0.7Fe_0.3)O were synthesized and deformed in a gas-medium torsion apparatus at temperatures of 1127 °C and 1250 °C, a confining pressure of 300 MPa and constant angular displacement rates equivalent to constant shear strain rates of 1–3.3 × 10^− 4 s^− 1. The samples deformed homogeneously to total shear strains of up to γ  15. During constant strain rate measurements the flow stress remained approximately stable at 1250 °C while it progressively decreased after the initial yield stress at the lower temperature. Mechanical data, microstructures and textures indicate that both phases were deforming in the dislocation creep regime. The weaker component, magnesiowüstite, controlled the rheological behavior of the bulk material and accommodated most of the strain. Deformation and dynamic recrystallization lead to grain refinement and to textures that were not previously observed in pure magnesiowüstite and may have developed due to the presence of the second phase. At 1127 °C, olivine grains behaved as semi-rigid inclusions rotating in a viscous matrix. At 1250 °C, some olivine grains remained largely undeformed while deformation and recrystallization of other grains oriented for a-slip on (010) resulted in a weak foliation and a texture typical for pure dry olivine aggregates. Both a-slip and c-slip on (010) were activated in olivine even though the nominal stresses were up to 2 orders of magnitude lower than those needed to activate these slip systems in pure olivine at the same conditions.  相似文献   

Melting and Sublimation of Planetary Ices Under Low Pressure Conditions: Laboratory Experiments with a Melting Probe Prototype     

Erika?Kaufmann  Günter?Kargl  Norbert?I.?K?mleEmail author  Manfred?Steller  Johann?Hasiba  Florian?Tatschl  Stefan?Ulamec  Jens?Biele  Marc?Engelhardt  Jens?Romstedt 《Earth, Moon, and Planets》2009,105(1):11-29

One possibility to explore the subsurface layers of icy bodies is to use a probe with a “hot tip", which is able to penetrate ice layers by melting. Such probes have been built and used in the past for the exploration of terrestrial polar ice sheets and may also become useful tools to explore other icy layers in the Solar System. Examples for such layers are the polar areas of Mars or the icy crust of Jupiter’s moon Europa. However, while on Earth a heated probe launched into an ice sheet always causes melting with subsequent refreezing, the behaviour of such a probe in a low pressure environment is quite different. We report on the results of some experiments with a simple “melting probe" prototype with two different kinds of hot tips in a vacuum environment. For one of the tips the probe moved into two types of ice samples: (i) compact water ice and (ii) porous water ice with a snow (firn) like texture. It was also found that the penetration behaviour was basically different for the two sample types even when the same kind of tip was used. While in the porous sample the ice was only subliming, the phase changes occurring during the interaction of the tip with the compact ice are much more complex. Here alternating phases of melting and sublimation occur. The absence of the liquid phase has severe consequences on the performance of a “melting probe" under vacuum conditions: In this environment we find a high thermal resistance between the probe surface and the underlying ice. Therefore, only a low percentage of the heat that is generated in the tip is used to melt or sublime the ice, the bulk of the power is transferred towards the rear end of the probe. This is particularly a problem in the initial phases of an ice penetration experiment, when the probe has not yet penetrated the ice over its whole length. In the compact ice sample, phases could be observed, where a high enough gas pressure had built up locally underneath the probe, so that melting becomes possible. Only during these melting periods the thermal contact between the probe and the ice is good and in consequence the melting probe works effectively.  相似文献   

Isotopic evidence (Sr/Sr, δLi) for alteration of the oceanic crust at deep-rooted mud volcanoes in the Gulf of Cadiz, NE Atlantic Ocean     

Florian Scholz  Christian Hensen  Anja Reitz  Rolf L. Romer  Volker Liebetrau  Anette Meixner  Stephan M. Weise  Matthias Haeckel 《Geochimica et cosmochimica acta》2009,73(18):5444-5459

The chemical and isotopic composition of pore fluids is presented for five deep-rooted mud volcanoes aligned on a transect across the Gulf of Cadiz continental margin at water depths between 350 and 3860 m. Generally decreasing interstitial Li concentrations and ⁸⁷Sr/⁸⁶Sr ratios with increasing distance from shore are attributed to systematically changing fluid sources across the continental margin. Although highest Li concentrations at the near-shore mud volcanoes coincide with high salinities derived from dissolution of halite and late-stage evaporites, clayey, terrigenous sediments are identified as the ultimate Li source to all pore fluids investigated. Light δ⁷Li values, partly close to those of hydrothermal vent fluids (δ⁷Li: +11.9‰), indicate that Li has been mobilized during high-temperature fluid/sediment or fluid/rock interactions in the deep sub-surface. Intense leaching of terrigenous clay has led to radiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.7106) in pore fluids of the near-shore mud volcanoes. In contrast, non-radiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.7075) at the distal locations are attributed to admixing of a basement-derived fluid component, carrying an isotopic signature from interaction with the basaltic crust. This inference is substantiated by temperature constraints from Li isotope equilibrium calculations suggesting exchange processes at particularly high temperatures (>200 °C) for the least radiogenic pore fluids of the most distal location.Advective pore fluids in the off-shore reaches of the Gulf of Cadiz are influenced by successive exchange processes with both oceanic crust and terrigenous, fine-grained sediments, resulting in a chemical and isotopic signature similar to that of fluids in near-shore ridge flank hydrothermal systems. This suggests that deep-rooted mud volcanoes in the Gulf of Cadiz represent a fluid pathway intermediate between mid-ocean ridge hydrothermal vent and shallow, marginal cold seep. Due to the thicker sediment coverage and slower fluid advection rates, the overall geochemical signature is shifted towards the sediment-diagenetic signal compared to ridge flank hydrothermal environments.  相似文献   

Modelling of sediment supply from torrent catchments in the Western Alps using the sediment contributing area (SCA) approach     

Moritz Altmann  Florian Haas  Tobias Heckmann  Frédéric Liébault  Michael Becht 《地球表面变化过程与地形》2021,46(5):889-906

The production of coarse sediment in mountain landscapes depends mainly on the type and activity of geomorphic processes and topographic and natural conditions (e.g. vegetation cover) of these catchments. The supply of sediment from these slopes to mountain streams and its subsequent transport lead to sediment connectivity, which describes the integrated coupled state of these systems. Studies from the Northern Calcareous Alps show that the size of the sediment contributing area (SCA), a subset of the drainage area that effectively delivers sediment to the channel network, can be used as a predictor of sediment delivery to mountain streams. The SCA concept is delineated on a digital elevation model (DEM) using a set of rules related to the steepness and length of slopes directly adjacent to the channel network, the gradient of the latter and the vegetation cover. The present study investigates the applicability of this concept to the Western Alps to identify geomorphologically active areas and to estimate mean annual sediment yield (SY) in mainly debris-flow-prone catchments. We use a statistical approach that shows a parameter optimisation and a linear regression of SY on SCA extent. We use a dataset of ~25 years of assessed coarse sediment accumulation in 35 sediment retention basins. In the investigated catchments, sediment transport is governed by several factors, mainly by the extent of vegetation-free areas with a minimum slope of 23° that is coupled to the channel network with a very low gradient of the latter. With our improved framework, we can show that the SCA approach can be applied to catchments that are widely distributed, in a large spatial scale (hectare area) and very heterogeneous in their properties. In general, the investigated catchments show high connectivity, resulting in significant correlations between long-term average yield and the size of the SCA.  相似文献   

Cartograms for Use in Forecasting Weather-Driven Natural Hazards     

Florian Pappenberger  Hannah L. Cloke  Calum A. Baugh 《The Cartographic journal》2019,56(2):134-145

This paper evaluates the potential of using cartograms for visualizing and interpreting forecasts of weather-driven natural hazards in the context of global weather forecasting and early warning systems. The use of cartograms is intended to supplement traditional cartographic representations of the hazards in order to highlight the severity of an upcoming event. Cartogrammetric transformations are applied to forecasts of floods, heatwaves, windstorms and snowstorms taken from the European Centre for Medium-range Weather Forecasts (ECMWF) forecast archive. Key cartogram design principles in standard weather forecast visualization are tested. Optimal cartogram transformation is found to be dependent on geographical features (such as coastlines) and forecast features (such as snowstorm intensity). For highly spatially autocorrelated weather variables used in analysing several upcoming natural hazards such as 2m temperature anomaly, the visualization of the distortion provides a promising addition to standard forecast visualizations for highlighting upcoming weather-driven natural hazards.  相似文献   

Learning from CDM SD tool experience for Article 6.4 of the Paris Agreement     

Karen Holm Olsen  Christof Arens  Florian Mersmann 《Climate Policy》2018,18(4):383-395

The Paris Agreement (PA) emphasizes the intrinsic relationship between climate change and sustainable development (SD) and welcomes the 2030 agenda for the global Sustainable Development Goals (SDGs). Yet, there is a lack of assessment approaches to ensure that climate and development goals are achieved in an integrated fashion and trade-offs avoided. Article 6.4 of the PA introduces a new Sustainable Mitigation Mechanism (SMM) with the dual aim to contribute to the mitigation of greenhouse gas emissions and foster SD. The Kyoto Protocol’s Clean Development Mechanism (CDM) has a similar objective and in 2014, the CDM SD tool was launched by the Executive Board of the CDM to highlight the SD benefits of CDM activities. This article analyses the usefulness of the CDM SD tool for stakeholders and compares the SD tool’s SD reporting requirements against other flexible mechanisms and multilateral standards to provide recommendations for improvement. A key conclusion is that the Paris Agreement’s SMM has a stronger political mandate than the CDM to measure that SD impacts are ‘real, measurable and long-term’. Recommendations for an improved CDM SD tool are a relevant starting point to develop rules, modalities, and procedures for SD assessment in Article 6.4 as well as for other cooperative mitigation approaches.

POLICY RELEVANCE

Research findings are relevant for developing the rulebook of modalities and procedures for Article 6.4 of the Paris Agreement, which introduces a new mechanism for mitigation of greenhouse gas emissions and sustainable development. Lessons learnt from the CDM SD tool and recommendations for enhanced SD assessment are discussed in context of Article 6 cooperative approaches, and make a timely contribution to inform negotiations on the rulebook agreed by the Conference of the Parties serving as the Meeting of the Parties to the Paris Agreement.  相似文献   

Modelling the effects of Zostera noltei meadows on sediment dynamics: application to the Arcachon lagoon     

Katerina Kombiadou  Florian Ganthy  Romaric Verney  Martin Plus  Aldo Sottolichio 《Ocean Dynamics》2014,64(10):1499-1516

A three-dimensional model has been modified to describe the complex interactions between hydrodynamics, sediment dynamics and biological parameters in the presence of Zostera noltei. The model treats seagrass leafs as flexible blades that bend under hydrodynamic forcing and alter the local momentum and turbulence fluxes and, therefore, the benthic shear conditions; these changes cause related changes to the mass balance at the boundary of the bed, in turn affecting the suspended matter in the column and ultimately primary productivity and the growth of the dwarf-grass. Modelling parameters related to the impact of Z. noltei to the local flow and to erosion and deposition rates were calibrated using flume experimental measurements; results from the calibration of the model are presented and discussed. The coupled model is applied in the Arcachon Bay, an area with high environmental significance and large abundance of dwarf-grass meadows. In the present paper, results from preliminary applications of the model are presented and discussed; the effectiveness of the coupled model is assessed comparing modelling results with available field measurements of suspended sediment concentrations and seagrass growth parameters. The model generally reproduces sediment dynamics and dwarf-grass seasonal growth in the domain efficiently. Investigations regarding the effects of the vegetation to the near-bed hydrodynamics and to the sediment suspension in the domain show that dwarf-grass meadows play an important part to velocity attenuation and to sediment stabilisation, with flow and suspended sediment concentrations damping, compared to an unvegetated state, to reach 35–50 and 65 %, respectively, at peak seagrass growth.  相似文献   

Removal of uranium(VI) from the aqueous phase by iron(II) minerals in presence of bicarbonate     

Simona Regenspurg  Dieter Schild  Thorsten Schfer  Florian Huber  Maria E. Malmstrm 《Applied Geochemistry》2009,24(9):1617-1625

  相似文献   

Runout analysis of a large rockfall in the Dolomites/Italian Alps using LIDAR derived particle sizes and shapes     

Florian Haas  Tobias Heckmann  Volker Wichmann  Michael Becht 《地球表面变化过程与地形》2012,37(13):1444-1455

LiDAR data were used to quantify and analyse a rockfall event which occurred in 2003 in the Western Dolomites (Italian Alps). In addition to previously existing airborne laserscanning (ALS) data, high resolution terrestrial laserscanning (TLS) data were collected. By using the original point clouds, the volume, axial ratio and runout length of single boulders as well as the surface roughness in the runout zone of the rockfall were derived. The total volume of the rockfall event of approximately 10 000 m³ was estimated by a reconstruction of the pre‐event surface at the detachment zone. The analysis of the laser scanning data of the accumulation zone revealed a power law scaling for boulder volumes larger than 8 m³. The dependence of runout length on boulder volume is complex; it is moderated by particle sphericity. In addition, we used ALS and TLS data to derive the spatial distribution of surface roughness on the talus cone. TLS allow for more accurate roughness mapping than ALS data, but for most applications the point density of ALS data seems to be sufficiently high to derive measures of roughness. Different sampling approaches for plane fitting on the scale of 5 m did not show significant effects besides the computational time. The results of our analyses provide important perspectives for rockfall modelling and process understanding with potential applications in both ‘applied’ (natural hazards) and ‘pure’ geomorphological research. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献